53Setting up the play back function by using the camera buttonPLAY MODEYou can set up the PLAY mode function by using the camera buttons.Power switchUsed for turning the camera power on / off.If this camera doesn't be operated during the specified time(about 60 SEC.), the camera power willbe idle(LCD monitor off, Camera status LED : Green) automatically(p.71). To use the camera again,press the camera buttons except the power switch.The camera power will be turned off automatically during periods of inactivity. This is done to reducebattery drain. The camera can be reactivated by sliding the power switch again.Shutter buttonPressing the shutter button in normal play back mode applies the DPOF(number of print : 1) functionto a still image that is stored only in the CARD.DPOF icon( ) will be displayed on the LCD monitor.LCD buttonPressing the LCD button in the PLAY mode will change the display as shown below.TV : Shutter speedAV : Aperture valueimage & basic information image & full informationPressing theLCD buttonPressing theLCD buttonADVANCED
