72SETTING UP THE CAMERA SYSTEMRESETThis menu allows you to reset all the camera settings to the default.DATE/TIME, LANGAGE, VIDEO OUT settings will not be changed by doing the [RESET] menu.After resetting the camera system, check the video output signal of the camera is same as that of thecountry where you are.Refer to following for information on the default.Selecting the default camera settingSteps 1 to 5 are the same as those for selecting the SETUPmode(p.68).6. Press the UP( ) /DOWN( ) button and select [RESET].7. Select [YES] or [NO] by pressing the LEFT( )/ RIGHT( )button and press the OK button.[Selecting YES] : All the camera setting is changed to thecamera default setting.[Selecting NO] : SETUP menu will display without theresetting the camera system.The default camera settingCamera setting Default Camera setting DefaultImage size 1280x1024 Slide show play back time 3 secQuality Fine Power off 3 minFlash Auto flash Beep ONLCD brightness 0 White balance AutoEV compensation 0.0EV Quick View ONSETUP 1/3BEEPFORMATPOWER OFFRESETYES NO
