77SETTING UP THE CAMERA SYSTEMVIDEO OUTSelecting the video out typeSteps 1 to 5 are the same as those for selecting the SETUPmode(p.68).6. To shift the menu cursor to [SETUP 2/3], press theDOWN( ) button at the [RESET] menu that is in [SETUP1/3].7. To shift the menu cursor to [SETUP 3/3], press theDOWN( ) button at the [LANGUAGE] menu that is in[SETUP 2/3].8. Select [[NTSC/60Hz]] or [PAL/50Hz] by pressing the LEFT( )/ RIGHT( ) button.9. Press the OK button to confirm the setting.INFORMATIONNTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland,Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden,Switzerland, Thailand, Norway.The alternating current frequency influences the image quality. In a country that takes NTSC videooutput type(A.C frequency : 60Hz), select [NTSC/60Hz] sub menu. In a country takes video outputtype(A.C frequency : 50Hz), select [PAL/50Hz] sub menu. Otherwise, there will be white lines on astored image.The Movie output signal from the camera can be NTSC or PAL. Your choice of output will begoverned by the type of machine (monitor or TV, etc.) to which the camera is connected.Select the correct movie standard for the outer monitor. PAL mode can support only BDGHI.SETUP 3/3VIDEO OUTNTSC PALADVANCED
