58SharpnessYou can select the sharpness of still image.1. Rotate the mode dial to the RECORDING mode and press theMENU button.2. Press the DOWN button and the cursor will be shifted to the main menu.3. Select the [SHOOTING] menu by pressing the UP/DOWN button.4. Press the DOWN button on the [SHOOTING] menu and the nextmenu page will be displayed.5. Select the [SHARP] menu by pressing the UP/DOWN button.6. Press the RIGHT button and the cursor will shift to the [SHARP] sub menu.7. Select the desired sub menu by pressing the UP/DOWN button.- SOFT : This gives smooth edges and the final imagewill have a soft appearance.- NORMAL : This setting will give a standard finish to thefinal image.- VIVID : This will give the image a crisp and clearappearance.8. Press the OK button to confirm the setting.Press the menu button twice and the menu display will disappear.Take a picture.INFORMATIONWhen the power is turned off, the changed setting value returns to the initial value.BACK:PROG SETUP MyCAMSET:OKISOW.BEFFECTSHARPEXIT:MENUPROG SETUP MyCAMPAGE:SIZEQUALITYMETERINGSHOOTING2272x1704FINEMULTISINGLESOFTNORMALVIVID
