Samsung Digimax Digimax V4000 User Manual

Contents

Samsung Digimax Digimax V4000 User Manual Manual pdf 72 page image

72Slide showImages can be displayed continuously at pre-set intervals.You can view the slide show by connecting the camera to an external monitor.INFORMATIONThe default is OFF and the loading time depends on the image size and quality.The slide show will start from an image that was displayed on the LCD monitor.The [POWER OFF] function can’t be activated. While the slide show is playing, only the firstframe of an AVI file is displayed.If there is only an image in the memory card, the slide show will not start.1. Press the play mode button and press the menu button.2. Press the DOWN button and the cursor will be shifted to the main menu.3. Select the [SLIDE] menu by pressing the UP/DOWN button.4. Press the RIGHT button and the cursor will shift to the [SLIDE]sub menu.5. Select the desired sub menu by pressing the UP/DOWN button.- If you select [01 ~ 10SEC], you can select the [REPEAT]secondary menu.Select [01 ~ 10SEC] and press the RIGHT button and the cursorwill shift to the secondary menu.6. Select the desired menu by pressing the UP/DOWN button.- [OFF] : If a cycle is completed, the slide show will stopautomatically.- [ON] : Even once a cycle(from the first image to the lastimage) is completed, the slide show will continue torepeat itself.7. Press the OK button to confirm the setting.Press the menu button twice and the slide show will start.8. To pause the slide show, press the play & pause button. To start the slide show again, press theplay & pause button again. Press the menu button twice again and the slide show will stop.BACK:PLAY SETUP MyCAMSET:OKSLIDEPROTECTRESIZEDEL. ALL01 SECBACK:PLAY SETUP MyCAMSET:OKSLIDEPROTECTRESIZEDEL. ALLREPEATOFFON