Samsung Digimax U-CA 401 User Manual

Contents

Samsung Digimax U-CA 401 User Manual Manual pdf 27 page image

27Fixed focusTo focus on the subject positioned outside of the center, use the focus lock function.Using the Focus Lock1. Ensure the subject in the center of the autofocus frame.2. Press the SHUTTER button halfway. When the autofocus lamp (green) lights up, it meansthe camera is focused on the subject. Be careful not to press the SHUTTER button all theway down to avoid taking an unwanted pictured.3. With the SHUTTER button still pressed down only halfway, move the camera torecompose your picture as desired, and then press the SHUTTER button completely totake the picture. If you release your finger from the SHUTTER button, the focus lockfunction will be canceled.FLASH( ) / LEFT button[ Selecting the Auto flash ]Flash range(AUTO) : 0.2 ~ 2mWhen the menu is displayed on the LCD monitor, pressingthe LEFT( ) button makes the cursor shift to the left tab.When the menu is not displayed on the LCD monitor, theLEFT( ) button operates as the FLASH ( ) button.Selecting the flash mode1. Slide the mode switch to the STILL IMAGE mode.2. Press the Flash( ) button until the desired flash modeindicator displays on the LCD monitor.3. A flash mode indicator will be displayed on the LCDmonitor.Use the correct flash to suit the environment.[ The image to be captured ] [ Press the SHUTTER buttonhalfway and focus on the subject ][ Recompose the picture and fullydepress the SHUTTER button ]