Samsung Digimax U-CA 401 User Manual

Contents

Samsung Digimax U-CA 401 User Manual Manual pdf 69 page image

69Before contacting a service centerPlease check the followingSymptom Causes Remedy- Insert fresh batteries- Connect an AC Power Adapter- There is low battery capacity- An AC Power Adapter is not connected- The batteries are exhausted- The Camera is turned off automatically.- The Adapter plug is not connected securely- The Camera is being used in lowtemperatures- There is insufficient memory capacity- The memory card has not been formatted- The memory card is exhausted- The camera’s power is off- The batteries are exhausted- The memory card is lockedThe cameradoesn’t switch onThe camerapower ceaseswhilst in useBatteries drainquicklyCamera doesnot takeimages whenpressing theShutter button- Insert fresh batteries- Push the power button to reactivate camera- Remove and re-insert the plug- Keep the camera in warm conditions (i.e.inside a coat or jacket) and only remove itin order to take images- After turning the camera off, insert a newmemory card or delete unnecessary image files.- Format the memory card.- Insert a new memory card- Turn the camera power on- Insert fresh batteries- Slide the write protect switch to thebottom of the memory card- A picture was taken within 0.6m from thesubject without setting an appropriatemacro mode- Taking a picture beyond the flash range- The lens is smudged or dirtyThe imagesare unclear- If the subject is closer than 0.6m, selectmacro shot mode or increase thecamera to subject distance- Take a picture within the flash range- Clean the lens- FLASH OFF mode has been selected.The flash doesnot fire - Disengage FLASH OFF mode- The date and time have been setincorrectly.Incorrect dateand time isdisplayed- Reset the date and time correctly.(p.59 ~ 60 )