Samsung Digimax U-CA 401 User Manual

Contents

Samsung Digimax U-CA 401 User Manual Manual pdf 50 page image

50Protecting imagesImages can be displayed continuously at pre-set intervals. You can view the slide show byconnecting the camera to an external monitor.1. Press and hold the Play mode button for 2 seconds, andpress the Menu button.2. Press the LEFT/ RIGHT button and select the [SLIDE]menu tab.3. Use the UP and DOWN buttons to select the desiredsubmenu value, and then press the RIGHT button.- Slide Show Display Interval: OFF, 1 ~10 seconds4. Use the UP and DOWN buttons to set whether to repeatthe slide show.[ON] : Even once a cycle(from the first image to the lastimage) is completed, the slide show will continue torepeat itself.[OFF]: If a cycle is completed, the slide show will stopautomatically.5. Press the OK button and the slide show will start.- To pause the slide show, press the shutter button.- To start the slide show again, press the shutter button again.- Press the menu button again and the slide show will stop.Starting the slide showMOVE PIC: SET:OKUNLOCK:EXIT:SH14. Select the desired secondary menu by pressing theUP/DOWN button and press the OK button.[UNLOCK] : Cancels the protect function.[LOCK] : Sets up the protect function.- If you select the[ONE PIC] sub menu at step 3, you canprotect or unprotect another image by pressing theLEFT/ RIGHT button. If you press the SHUTTER button,the Image Protection menu will disappear.- If you protect an image, the protect icon( ) will be displayed on the LCD monitor.(An unprotected image has no indicator)- An image in LOCK mode will be protected from [DELETE] or [DEL.ALL] functions, but willNOT be protected from the [FORMAT] function.5. Press the shutter button and the menu will disappear.SLIDEEXIT:MENU MOVE:OFFSLIDEMOVE: CHANGE:1 SECREPEATONOFF