15Connecting to a Power SourceUsing the batteriesRemoving the battery1. Turn off the camera power. Open the battery chambercover and move the battery holder aside. The battery willbe released.2. Take out the battery and close the battery chamber cover.: If the camera does not turn on after you have inserted batteries,please check whether the batteries are inserted with the correctpolarity(+/-).1. Open the battery chambercover by pushing in thedirection of the arrow.2. Insert the batteries takingnote of the polarity (+ / -).3. To close the batterychamber cover, push ituntil it clicks.When the battery chamber cover is opened, do not press the battery chamber cover byforce. This may cause the battery chamber cover modification or breakage.INFORMATIONThere are 4 indicators for battery condition that are displayed on the LCD monitor.Battery statusBattery indicatorThe battery is fullychargedLow battery capacity(Prepare to recharge oruse spare battery)Low battery capacity(Prepare to rechargeor use spare battery)Low battery capacity(Prepare to rechargeor use spare battery)
