Samsung ET-WV525 User Manual

Also see for SmartThings Wifi ET-WV525: User manual User manual User manual Quick start guide

S AMSUNG WIRELESS ROUTER U SER M ANUAL P AGE 23Internet Connection Type: PPTP (Username / Password)Select PPTP (Point-to-Point Tunneling Protocol) from the drop-down menu if your ISP uses a PPTP connection. Your ISPwill provide you with a username and password. This option is typically used for DSL services.The following parameters can be configured:Address Mode: Here the user can specify whether this Internet connection requires the use of a Dynamicor Static IP address. PPTP usual requires a Dynamic IP configuration.PPTP IP Address: Enter the PPTP IP address used here. This option is only available if Static IP is selected.PPTP Subnet Mask: Enter the PPTP Subnet Mask used here.PPTP Gateway IP Address: Enter the PPTP Gateway IP address used here.PPTP Server IP Address: Enter the PPTP Server IP address used here. This is normally the same a the PPTP Gate-way IP address.Username: Enter the PPTP username used here.Password: Enter the PPTP password used here.Verify Password: Re-enter the PPTP password used here.Reconnect Mode: Use the radio buttons to specify the reconnect mode. The user can specify a customschedule or specify the On Demand, or Manual option. To specify a custom sched-ule, use the drop-down menu to select one of the schedules that has been defined in theSchedules page. To create a new schedule, click the New Schedule button to open theSchedules page. Schedules will be discussed later.Maximum Idle Time: Enter a maximum idle time during which the Internet connection is maintained duringinactivity. To disable this feature, enable Auto-reconnect.Primary DNS Server: Enter the Primary DNS IP address used here.Secondary DNS Server: Enter the Secondary DNS IP address used here. This field is normally optional. Only oneDNS address is required for a functional Internet connection, but using a second DNSaddress provides more stability.