Samsung Entro BMC-M350 User Manual

Contents

Settings 82Settings7. Touch Save.Touch SensitivityYour phone’s touchscreen requires a small amount of pressure to operate. The smaller thesize of your contact point on the display screen, the less amount of pressure required. Thetip of your finger will work better than the pad of your finger and a fingernail will requireeven less pressure. Initially, your phone’s sensitivity is set to the highest level. When youhave discovered your preffered method of operating your touchscreen, you may find that itis too sensitive for some applications. You can adjust how sensitive the phone is to touchactions on the screen.To adjust the touch sensitivity:1. Touch Menu.2. Touch Settings.3. Touch General.4. Touch Touch Sensitivity.5. Touch and drag the slider left or right to adjust the sensitivity level.6. Touch Touch here to gauge the response of the new sensitivity level.Touch CalibrationThe Touch Calibration feature allows you to re-align the screen’s touch accuracy. Use thisfeature only when the device does not respond properly when you touch the screen.To adjust the calibration:1. Touch Menu.2. Touch Settings.3. Touch General.4. Touch Touch Calibration.5. Touch the center of the target and repeat this step as the target movesaround the four corners of the screen.• Touch Restore to restore the target to its original calibration.• Touch Retry to try the calibration again.Note: When touching the screen in Calibration mode, you must touch the center of thecross hair area.6. When the calibration is completed, touch Yes to accept the calibration.