Tools 52Tools7. Select a start and end time for the event by touching the corresponding Startand End fields.8. Assign an hour and minute by either:• Scrolling through both reels (Hours and Minutes) by sliding your finger upand down on the display screen.• Touching the arrows above/below each field.Tip: Touching and holding down the arrows (up or down) increases the speed at which thenumbers scroll through each reel.• Touch either am or pm.• When you have finished setting the times, touch Done.Note: If you need to adjust the end date for an event, touch the Date field and select a newend date by touching a day in the onscreen calendar.9. Select an alert time for the event by touching the Alert field and touching oneof the following options: On Time, 5 minutes before, 10 minutes before, 15minutes before, 30 minutes before, 1 hour before, 3 hours before, 5hours before, 1 day before.10. Select a ringer type for the alarm by touching Set Ringer and then selectinga ringer.• Touch to play a sound sample for a selected ringer.• If a ringer has been previously selected, scroll through the list of availableringers and touch a ringer name to assign it.11. Select a reminder status for the event by touching the Reminder field andthen touching one of the following options: Off, Every 2 minutes, and Every15 minutes.12. Touch Save to save the new event.Note: If the end time and date fall before the start time and date, an onscreen warningmessage is displayed and you can edit the values onscreen.