Phone Basics 12Phone BasicsMaking and Answering CallsTo make a call:1. Touch Phone.2. Enter a phone number using the onscreen dialpad. (If you make a mistakewhile dialing, press to erase one digit at a time. Press and hold toerase the entire number.)3. The phone number appears in the button as you type. Touchto call the number, the press .4. Press when you are finished.Tip: To redial your last recent call, press twice.Tip: Some networks support + dialing. + dialing automatically indicates to the network thatyou are dialing an international call and adds the international dialing prefix (typically ‘011’)to the call automatically. To use + dialing, press and hold the 0 key (until the + appears)before entering the phone number.To answer an incoming call:1. Make sure your phone is on. (If your phone is off, incoming calls go toVoicemail.)2. Press to answer the call.Your phone notifies you of incoming calls in the following ways:• The phone rings or vibrates (unless set to Silence All).• The backlight illuminates.• The screen displays an incoming call message.• The is displayed at the top of the display screen.If the incoming call is from a number stored in your Contacts, the Contacts entry’s name isdisplayed. The caller’s phone number may also be displayed, if available.The following options are also available to handle an incoming call:• Press to end the call and send the caller to Voicemail. You can press thevolume key on the side of the phone to quiet the ringer.TalkTALK