English-14Basic functionBasic operation is an operation mode that can be selected by pressing the Mode button.auto(2-Step Cooling or Heat)In Auto mode, the air conditioner will automatically set the temperature and fan speed depending on the roomtemperature• 2-Step Cooling mode sets the air conditioner to operate in Fast + Cool mode when set temperature is lower than indoortemperature, and then the air conditioner will automatically operate in Dry mode when indoor temperature reaches settemperature• If using a multi system, in Auto operation, the system selects a temperature setting and an appropriate operation mode(COOL or HEAT) based on the room temperature at the start of the operation.CoolIn Cool mode, the air conditioner will cool your room You can adjust the temperature and the fan speed to feel cooler in hotseason• If current outside temperature is much higher than the selected indoor temperature, it may take time to bring the innertemperature to the desired coolness• Quiet mode makes the noise quieter during the operation of the indoor unit in the Cool modeDryThe air conditioner in Dry mode acts like a dehumidifier by removing moisture from the indoor airDry mode makes the air feel refreshing in a humid climateTo activate the Dry mode, set temperature on the remote controller should be lower than indoor room temperatureFanFan mode can be selected to circulate your room Fan mode will be helpful to refresh the stale air in your roomHeatThe air conditioner heats as well as cools Warm your room with this versatile appliance in the cold of winter• Fan may not operate for about 3~5 minutes at the beginning to prevent any cold blasts while the air conditioner iswarming up• Quiet mode makes the noise quieter during the operation of the indoor unit in the Heat mode• Since the air conditioner heats the room by taking heat energy from outdoor air, the heating capacity may decrease whenoutdoor temperature is extremely lowUse an additional heating appliance in combination with the air conditioner if you feel the air conditioner heatsinsufficientlyA3050 Australia_IB&IM_DB68-05206A_EN.indd 14 2014/12/29 19:07:16