English - 15OperationTurning the TV On and OffPress the POWER button on the remote control.You can also use the POWER button on the TV.➢ It may take a while when your TV starts.Plug & Play FeatureWhen the TV is initially powered On, basic settings proceed automatically and subsequently:1 Press the POWER button on the remote control.The message Menu language, Shop Mode, Channels and Time will be set. isdisplayed.2 Press the ENTER button, the Select the language of the OSD menu isautomatically displayed.Press the ▲ or ▼ button to select language, then press the ENTER button.The message Select Home Mode when installing this TV at home. isautomatically displayed.3 Press the ◄ or ► button to select Shop or Home, then press the ENTERbutton.➢ The default selection is Home.➢ We recommend setting the TV to Home mode for the best picture in yourhome environment.➢ Shop mode is only intended for use in retail environments.➢ If the unit is accidentally set to Shop mode and you want to return toDynamic (Home) mode, press any Volume button and then hold down theMENU button for five seconds on the TV panel.4 Press the ▲ or ▼ button to memorize the channels of the selected connection.Press the ENTER button to select Start.➢ If the antenna is connected to ANT1 IN(AIR), select Air and if it is connectedto ANT 2 IN(CABLE), select Cable.➢ If both ANT 1 IN(AIR) and ANT 2 IN(CABLE) are connected,select the Air + Cable.➢ In Cable mode, select the correct analog signal cable system source amongSTD, HRC, and IRC by pressing the ▲ or ▼ button, then press the ENTERbutton. If you have Digital cable, select the cable system signal source forboth Analog and Digital. Contact your local cable company to identify thetype of cable system that exists in your particular area.To memorize the channels, press the ► button to select Start, then pressthe ENTER button.Contact your local cable company to identify the type of cable system thatexists in your particular area.Continued...Menu language, Shop Mode,Channels and Time will be set.iStartSelect Home Mode when installing this TV at home.Plug & PlayEnter SkipShop HomeMoveSelect the language of the OSD.Menu Language :Plug & PlayEnglishEspañolFrançaisEnter SkipMoveSelect the antennas to memorize.AirCableAir + CablePlug & PlayStartStartStartEnter SkipMovePlug & PlayEnter SkipMoveSelect the cable system.STDHRCIRCAnalogSTDHRCIRCDigitalStart
