English - 54Setting the Function HelpDisplays help on the menu functions.1 Press the MENU button to display the menu.Press the ▲ or ▼ button to select Setup, then press the ENTER button.2 Press the ▲ or ▼ button to select Function Help, then press the ENTERbutton.3 Press the ▲ or ▼ button to select Off or On, then press the ENTER button.Press the EXIT button to exit.➢ The Function Help default setting is On.▲ MoreScreen Burn ProtectionHDMI Black Level : NormalFilm Mode : OffWall-Mount AdjustmentPIPFunction Help : OnSW UpgradeSetupT VEnterMoveOffOn▲ MoreScreen Burn Protection ►HDMI Black Level : Normal ►Film Mode : Off ►Wall-Mount Adjustment ►PIP ►Function Help : On ►SW Upgrade ►SetupT VEnterMove ReturnReturnSide GrayWhen you watch TV with the screen ratio of 4:3, the screen is prevented from anydamage by adjusting the white balance on both extreme left and right sides.To prevent the screen burn from happening, select Dark or Light.• Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.• Light: When you set the screen ratio to 4:3, it brightens the left and right sides.➢ To remove after-images on the screen, use either the White or Scrollingfunction. Although both functions remove after-images on the screen, Scrollingis more effective.➢ The after-image removal function has to be executed for a long time(approximately 1 hour) to effectively remove after-images on the screen. If theafter-image is not removed after performing the function, repeat the functionagain.➢ Press any key on the remote control to cancel this feature.Pixel ShiftWhiteScrollingSide Gray : DarkScreen Burn ProtectionT VEnterMoveDarkLightReturnReducing the Effects of Screen BurnIf screen burn has occurred, you can select a white screen or scrolling to help remove screen burn artifacts.1 Press the MENU button to display the menu.Press the ▲ or ▼ button to select Setup, then press the ENTER button.2 Press the ▲ or ▼ button to select Screen Burn Protection, then press theENTER button.3 Press the ▲ or ▼ button to select White, Scrolling, or Side Graythen press the ENTER button.Press the EXIT button to exit.WhiteThis function removes after-images on the screen by changing the color of pixels towhite. Use this function when there are remaining after-images or symbols on thescreen especially when you displayed a still image on the screen for a long time.ScrollingThis function removes after-images on the screen by moving all the pixels on thePDP according to a pattern. Use this function when there are remaining after-imagesor symbols on the screen especially when you displayed a still image on the screenfor a long time.Pixel Shift ►White ►Scrolling ►Side Gray : Dark ►Screen Burn ProtectionT VEnterMove ReturnPixel Shift ►White ►Scrolling ►Side Gray : Dark ►Screen Burn ProtectionT VEnterMove Return
