English - 76AppendixProblem Possible SolutionPoor picture quality. Try another channel.Adjust the antenna.Check all wire connections.Poor sound quality. Try another channel.Adjust the antenna.No picture or sound. Try another channel.Press the SOURCE button.Make sure the TV is plugged in.Check the antenna connections.Make sure the MUTE button is off.No sound or sound is too low atmaximum volume.First, check the volume of units connected to your TV (digital broadcasting receiver, DVD, cablebroadcasting receiver, VCR, etc.). Then, adjust the TV volume accordingly.Picture rolls vertically. Check all connections.The TV operates erratically. Unplug the TV for 30 seconds, then try operating it again.The TV won’t turn on. Make sure the wall outlet is working.Remote control malfunctions Replace the remote control batteries.Clean the upper edge of the remote control (transmission window).Check the battery terminals.Press the TV button to put your remote control in the TV mode.Make sure the remote has batteries.Check that the “+” and “-” ends of the batteries are inserted correctly.Digital broadcasting screen problem. Please check the digital signal strength and input antenna.The image is too light or too dark. Adjust the Brightness and Contrast.Adjust the Fine tuning.The image is too large or too small. Adjust the Size settings.The visual qualities of digital channelsvary.The visual qualities of digital channels may vary depending on the original production method(analog or digital).- If the original production method is digital: High visual quality.- If the original production method is analog: The digital program displayed on the screen isoriginally an analog program which has been converted to digital.The visual quality is of an SD(Standard Definition) grade.Screen is black and power indicatorlight blinks steadily.On your computer; check the Power and Signal Cable.The TV is using its power management system.Move the computer’s mouse or press any key on the keyboard.On your equipment check (STB, DVD, etc) ; Power and Signal Cable.The TV is using its power management system.Press the Source button on the panel or remote control.Turn the TV off and on.Although the TV caption shows HD,the visual quality is not satisfactory.The HD(High Definition) caption that appears when switching channels or when pressing theInformation button on the remote control means the selected channel is a digital channel. If thebroadcasting station converts an analog signal into digital and transmits the signal, the visualquality may not be perfect.The damaged picture appears in thecorner of the screen.If Just Scan is selected in some external devices, the damaged picture may appear in thecorner of the screen. This symptom is caused by external devices, not TV.TroubleshootingIf the TV seems to have a problem, first try this list of possible problems and solutions.If none of these troubleshooting tips apply, call your nearest Samsung service center.
