Call Functions 20Note: If you select 2-Sec Pause, P appears in the display. If you select Wait,W appears in the display.5. Press to call the number.Making a Call — Speed DialingYou can store phone numbers and contact names in your phone’sContacts list. Speed Dialing lets you quickly and easily dial anycontact in your Contacts list by using that contact’s locationnumber in the list. You can assign and change location (speeddial) numbers for your contacts. (See “Assignment During EntryCreation” on page 44.)One-Touch DialingSpeed Dial numbers 2 through 9 are special One-Touch dialingnumbers. You can call the phone numbers stored in your phone’sContacts list and assigned Speed Dial numbers 2 through 9 bypressing and holding a single key.Example: For Speed Dial number 3, press and hold the key until thename and number appear in the display and the number is dialed.Two-Touch DialingMemory locations 10 through 99 are special Two-Touch dialinglocations.Example: For location number 13, briefly press , then press and holduntil the name and number appear in the display and the number isdialed.Three-Touch DialingMemory locations 100 through 999 are special Three-Touchdialing locations.Example: For location number 113, briefly press , briefly pressagain, then press and hold until the name and number appearin the display and the number is dialed.Pause Dialing From a Contacts Entry• If you speed dial a contact that contains (two-second) P pause(s)simply wait for the pauses to pass and the dialing to complete.• If you speed dial a contact that contains (hard) W pause(s), wait for theappropriate prompt(s) from the number you are calling (credit cardnumber, bank account number, and so on) and enter the appropriateresponse(s).
