Memory Card 69Important! DO NOT remove a microSD card while the device isaccessing or transferring files. Doing so will resultin loss or damage of data. Make sure your batteryis fully charged before using the microSD card.Your data may become damaged or lost if thebattery runs out while you are using the microSDcard.Mounting the SD CardTo store photos, music, videos, and other applications. Youmust mount (install) the SD card prior to use. Mounting theSD card establishes a USB connection with your computer.Important! You must enable USB storage to mount the SDcard.1. Press ➔ and then tap Settings ➔ Storage.2. Tap Mount SD card.Communicating with the SD card1. Insert the SD card into the external, SD card slot (Formore information, refer to “Installing the microSDMemory Card” on page 11.)2. Verify the card is properly mounted.Note: Your device is configured to be used as a storage/mediadevice by default. If it does not respond properly, you willneed to verify the Debugging mode is not enabled.3. Configure the device for USB storage mode connectionby verifying Debugging mode is not enabled:• Press ➔ and then tap Settings ➔ Developeroptions.• Remove a check mark from the USB debugging field, ifpresent.• For more information, refer to “USB Debugging” on page307.4. Connect the USB cable to the phone and connect thecable to the computer.
