English-26Using Automatic Picture SettingsYour TV has four automatic picture settings (“Dynamic”, “Standard”, “Movie”, and “Custom”) that are preset at the factory.You can activate either Dynamic, Standard, Movie, or Custom by making a selection from the menu.1. Press the MENU button to display the menu.Press the …… or †† button to select “Picture”, then press the ENTER button.2. Press the ENTER button to select “Mode”.Press the ENTER button again.Press the …… or †† button to select the “Dynamic”, “Standard”, “Movie”,or “Custom” picture setting, then press the ENTER button.➢ Picture mode needs to be adjusted separately for each input.3. Press the …… or †† button to select “Contrast”, “Brightness”, “Sharpness”,“Color”, or “Tint”, then press the ENTER button.4. Press the œ or √ button to decrease or increase the value of a particular item.Press the ENTER button.➢ • “Tint” doesn’t operate in PC, HDMI or any Component mode.• In PC mode, only the Contrast and Brightness can be selected.• The Tint cannot be adjusted while watching Digital TV.• Each adjusted setting will be stored separately according to its input mode.• When you make changes to Contrast, Brightness, Sharpness, Color, or Tint.OSD color will also be adjusted accordingly. Choose Dynamic to increase the clarity and sharpness of the picture. Choose Standard for the standard factory settings. Choose Movie when watching movies. Choose Custom if you want to adjust the settings according to personal preference.Picture ControlMode : Dynamic √Size : 16:9 √Digital NR : On √DNIe : On √Film Mode : Off √Blue Screen : Off √PIPPictureT VMove Enter ReturnMode : DynamicContrast 100Brightness 45Sharpness 75Color 55Tint G 50 R 50Color Tone : Cool1ResetModeT VMove Enter ReturnDynamicStandardMovieCustomPress the P.MODE button on the remote control to select one of the standard picturesettings.ModeT VMove Enter ReturnMode : DynamicContrast 100Brightness 45Sharpness 75Color 55Tint G 50 R 50Color Tone : Cool1ResetContrast 100Continued...