Samsung HP-S4233 Owner's Instructions Manual

Also see for HPS5033 - 50" Plasma TV: Manual Service manual Manual de instrucciones

Contents

English-40Checking the Digital-Signal StrengthLNA (Low Noise Amplifier)1. Press the MENU button to display the menu.Press the …… or †† button to select “Channel”, then press the ENTER button.2. Press the …… or †† button to select “LNA”, then press the ENTER button.3. Press the …… or †† button to select “Off” or “On”, then press the ENTER button.Press the EXIT button to exit.➢ LNA functions only when antenna is set to AIR or CABLE. (See “Selecting the Antenna”on page 36.)➢ If the picture is noisy with the LNA set to On, select Off.➢ The LNA setting must be made separately for each channel.If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts theincoming signal).1. Press the MENU button to display the menu.Press the …… or †† button to select “Channel”, then press the ENTER button.2. Press the …… or †† button to select “Signal Strength”, then press the ENTER button.If the signal strength meter indicates that the signal is weak, physically adjustyour antenna to increase the signal strength.Continue to adjust the antenna until you find the best position with the strongest signal.Press the EXIT button to exit.You can also press the ENTER button to select OK then press the EXIT buttonto exit the menu.Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect receptionquality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjustyour antenna to improve the reception of available digital channels.Antenna : Air √Auto Program √Channel Manager √Name √Fine Tune √Signal Strength √† MoreChannelT VMove Enter ReturnSignal StrengthT VReturnEnterOK… MoreLNA : On √ChannelT VMove Enter Return… MoreLNA : OffChannelT VMove Enter ReturnOffOn