English-45Option 2: Setting the Clock AutomaticallyThe Clock can be set automatically if you are receiving a digital signal.1. Press the MENU button to display the menu.Press the …… or †† button to select “Setup”, then press the ENTER button.Press the …… or †† button to select “Time”, then press the ENTER button.2. Press the ENTER button to select “Clock”.3. Press the ENTER button to select “Clock Mode”.Press the …… or †† button to select “Auto”, then press the ENTER button.4. Press the …… or †† button to select “Time Zone”, then press the ENTER button.5. Press the …… or †† button to highlight the time zone for your local area(and to move the highlight to the appropriate time zone on the map of theUnited States), then press the ENTER button.6. Press the …… or †† button to select “DST” (Daylight Saving Time), then press theENTER button.Press the …… or †† button to select “On” or “Off”, then press the ENTER button.Press the EXIT button to exit.➢ Depending on the broadcast station and signal, the auto time may not be set correctly.If this occurs, set the time manually.➢ Air or cable must be connected in order to set the time automatically.-- / -- / ---- / -- : -- --Clock √Sleep Timer : Off √On Timer : Inactivated √Off Timer : Inactivated √TimeT VMove Enter ReturnClock Mode : AutoClock SetTime ZoneDST : OffClockT VMove Enter ReturnManualAutoSelect the time zone in which you live.Time ZoneNewfoundlandAtlanticEasternCentralMountainPacificAlaskaHawaiiEnter ReturnMoveT VClockT VMove Enter ReturnClock Mode : AutoClock SetTime ZoneDST : NoOnOffPlug & Play √Language : English √Time √Game Mode : Off √V-Chip √Caption √† MoreSetupT VMove Enter ReturnContinued...