Samsung HP-S6373 Owner's Instructions Manual

Also see for HPS6373 - 63" Plasma TV: Manual

Contents

English-10After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambledchannels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)2. Connect this cable to a two-way splitter.SplitterIncomingcable3. Connect an Antenna cable between anOUTPUT terminal on the splitter and theIN terminal on the cable box.SplitterCable BoxIncomingcable4. Connect an Antenna cable between theANT OUT terminal on the cable box andthe B–IN terminal on the RF(A/B) switch.SplitterCable BoxRF (A/B)SwitchIncomingcable5. Connect another cable between the otherOUT terminal on the splitter and the A–INterminal on the RF (A/B) switch.SplitterCable BoxIncomingcable6. Connect the last Antenna cable between theOUT terminal on the RF (A/B) switch andthe ANT 1 IN (CABLE) terminal on the rearof the TV.SplitterCable BoxIncomingcableConnecting to a Cable Box that Descrambles Some ChannelsIf your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-waysplitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics stores.)1. Find and disconnect the cable that isconnected to the ANT IN terminal on yourcable box.➢ This terminal might be labeled “ANT IN”,“VHF IN” or simply, “IN”.ANT INRF (A/B)SwitchTV RearRF (A/B)SwitchANT 1 IN (CABLE)Connecting Cable TVTo connect to a cable TV system, follow the instructions below.Cable without a Cable Box1. Plug the incoming cable into the ANT 1 IN (CABLE) terminal on the back of the TV.➢ Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.2. Connect the other end of this cable to the ANT 1 IN (CABLE) terminal on the back of the TV.Connecting to a Cable Box that Descrambles All Channels1. Find the cable that is connected to the ANT OUT terminal on your cable box.➢ This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.ANT OUTANT INANT 1 IN (CABLE)ANT 1 IN (CABLE)