Samsung HP-S6373 Owner's Instructions Manual

Also see for HPS6373 - 63" Plasma TV: Manual

Contents

English-15Turning the TV On and OffPress the POWER button on the remote control.You can also use the POWER button on the TV.➢ It may take a while when your TV starts.Plug & Play FeatureWhen the TV is initially powered On, basic customer settings proceed automatically and subsequently:1. Press the POWER button on the remote control.The message “Menu language, Channels and Time will be set.” is displayed.Press the ENTER button, then “Select Home Mode when installing this TV athome.” menu is automatically displayed.2. Press the œ or √ button to select “Shop” or “Home”, then press the ENTERbutton. “Select the language of the OSD” menu is automatically displayed.➢ The default selection is “Home”.➢ We recommend setting the TV to Home mode for the best picture in your homeenvironment.➢ Shop mode is only intended for use in retail environments.➢ If the unit is accidentally set to Shop Mode, press and hold the MENU button on the sidepanel of the TV for five seconds to return to Dynamic (Home) mode.3. Press the ENTER button to enter the language.Press the …… or †† button to select language, then press the ENTER button.“Select the antennas to memorize.” menu is automatically displayed.4. Press the …… or †† button to memorize the channels of the selected connection.Press the ENTER button to select “Start”.➢ If the antenna is connected to ANT 2 IN (AIR), select “Air” and if it is connected toANT 1 IN (CABLE), select “Cable”.➢ If both ANT 2 IN (AIR) and ANT 1 IN (CABLE) are connected, select the “Air + Cable”.➢ In Cable mode, you can select the correct signal source among STD, HRC, and IRCby pressing the …… or †† button, then press the ENTER button.Contact your local cable company to identify the type of cable system that exists in yourparticular area.OperationMenu language, Channelsand Time will be set.iStartSelect the language of the OSD.Menu Language :Plug & PlayEnter SkipEnglishSpanishFrenchMoveSelect the antennas to memorize.AirCableAir + CablePlug & PlayEnter SkipMoveStartStartSelect the cable system.STDHRCIRCPlug & PlayEnter SkipMoveStartContinued...Select Home Mode when installing this TV at home.Plug & PlayEnter SkipShop HomeMove