Samsung HT-D7100 User Manual

Also see for HT-D7100: Declaration of conformity

Contents

18 EnglishConnectionsConnecting the Wireless SubwooferConnect the power cord on the rear of the subwoofer to the power.If the main unit is turned onThe subwoofer will be automatically connected to the product and the Link LED on its front will blinkblue for a few seconds.If the main unit is turned offThe Link LED on the front of the subwoofer will blink blue for about 30 seconds, then will changeto red as the sub switches to STANDBY mode.Attaching the Toroidal Ferrite Core to the Power Cord of the SubwooferIf you attach a Toroidal ferrite core to the power cordof the Subwoofer, it will help to prevent RFinterference from radio signals.Pull the fixing tab of the Toroidal ferrite core toopen it.Make three loops in the power cable of thesubwoofer.Attach the Toroidal ferrite core to the Subwooferpower cord as the figure shows and press ituntil it clicks.Connecting the Front SpeakersPress down the terminal tab on the rear of thespeaker.Insert the black wire into the black terminal (–) andthe red wire into the red (+) terminal, and thenrelease the tab.Connect the connecting plugs to the rear of thesubwoofer by matching the colours of thespeaker plugs to the speaker jacks.••1.2.3.1.2.3.VOLPS-WD7100ID SETRR LLFront Speaker (L)Front Speaker (R)SubwooferID SETR LHT-D7100_ELS_1227.indd 18HT-D7100_ELS_1227.indd 18 2011-12-27 1:18:402011-12-27 1:18:40