20 EnglishConnectionsConnecting the Video Out to your TVChoose one of the two methods for connecting to a TV.METHOD 1 : HDMI (BEST QUALITY)Connect an HDMI cable (not supplied) from the HDMI OUT jack on the rear of the product to the HDMIIN jack on your TV.NOTECertain HDMI output resolutions may not work, depending on your TV.After making the video connection, set the Video input source on your TV to match the corresponding Videooutput (HDMI or Composite) on your product.See your TV owner's manual for more information on how to select the TV's Video Input source.If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remotecontrol and select HDMI as the external source of the TV.HDMI Auto Detection FunctionUsing an HDMI cable, connect the HDMI OUT terminal on the rear of the product to the HDMI INterminal of your TV.Turn on the product and TV.For possible HDMI resolutions, see page 28.This function is not available if the HDMI cable does not support CEC.HDMI is an interface that enables the digital transmission of video and audio data with just a singleconnector.Using HDMI, the product transmits a digital video and audio signal and displays a vivid picture on a TVhaving an HDMI input jack.HDMI connection description- HDMI outputs only a pure digital signal to the TV.- If your TV does not support HDCP, random noise appears on the screen.What is the HDCP?HDCP (High-band width Digital Content Protection) is a system for protecting BD/DVD content outputtedvia HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and adisplay device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorizedcopies from being made.✎1.2.••••FM ANT. LAN HDMI OUT OPTICALDIGITALAUDIO IN5V 500mAVIDEO OUTDC 12VHDMI OUTHDMI INMETHOD 1Attach the ferrite core (Small)as shown.HT-D7100_ELS_1227.indd 20HT-D7100_ELS_1227.indd 20 2011-12-27 1:18:442011-12-27 1:18:44