Samsung HT-DM550 Instruction Manual

Also see for HT-DM550: Manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

SETUP3837Dolby Pro Logic II Effect FunctionEffect• When playing a DVD encoded in two or more channels, DOLBY PRO LOGIC II modecannot be selected.• Panorama ModeThis mode extends the front stereo image to include the surround speakers for anexciting “wraparound” effect with side wall imaging.• Center Width ControlThis control adjusts the center image so it may be heard only from the center speaker;only from the left/right speakers as a phantom image; or from all three front speakers tovarying degrees.• Dimension ControlThis control gradually adjusts the soundfield either towards the front or towards the rear.2 3Press the Pro Logic II button. Press the DSP/DPL II Mode button.1Press the Function button on the front panel to select the desired function.• Each time the Pro Logic II button is pressed.• Select from FM AM DVD DIGITAL IN AUX 1 AUX 2.• Each time the DSP/DPL II Mode button is pressed.• Each time the DSP/DPL II Effect button is pressed.PRO LOGICL RL RPRO LOGICL RPRO LOGICL RPRO LOGICL RPRO LOGICL RPRO LOGIC II : Left, Center, Right,Subwoofer andSurround(Left, Right)ChannelsSTEREO : Left, Right and Subwoofer ChannelsDolby Pro Logic II decoderDolby Pro Logic II is a new format for playing multichannel audio signals that offers improvements overconventional Dolby Pro Logic. It can be used to decode not only sources recorded in Dolby Surround, butalso regular stereo sources into five channels (front left/right, center and surround left/right). In addition,various parameters can be set according to the type of source and the contents, so you can adjust thesound field with greater precision.This function works only in the DPL II M (Dolby Pro Logic II Music) Mode.Pro Logic II ModeSelect one of the modes (“Music”, “Cinema”, “Pro Logic” or “MATRIX”).• The Music mode is recommended when listening to CDs or watching DVDs with mostlymusical content.• The Cinema mode is best when watching movies.• The Pro Logic mode offers the same surround processing as original Pro Logic and isbest used when the source contents are not of optimum quality.• The Matrix mode is useful for when the audio is mono.Dolby Pro Logic II1 2Press the DSP/DPL II Effect button.Select “0” or “1”The control canbe set in 8 stepsfrom 0 to 7.The control canbe set in 7 stepsfrom 0 to 6.Use the Left/Right ( / ) button to makeadjustments.