RADIO OPERATION4241When the button is pressed, a presetbroadcast station is selected.Hold in the button. Automatic searchingbegins, and then stops when a station is tuned in.Press the button to tune to the chosenstation. The frequency changes incrementally in eitherdirection each time the corresponding button is pressed.Listening to the Radio Presetting stationsAuto Station 1Auto Station 2Manual StationPress the Tuner(Band)button.1 Select a broadcast station.2• The selection toggles backand forth between "FM" and"AM" each time theTuner(Band) button ispressed.Press the MO/ST button. (FM only)• The selection toggles back and forth between “STEREO” and “MONO”each time the MO/ST button is pressed.• In a poor reception areas, select Mono mode for a clear, interference-freebroadcast.To Listen in Mono/StereoAudioMO/STSee the previous page.To tune in a preset stationExample: Presetting FM 89.1 in the memoryMH ZL RPRGMMH ZL RPRGMMH ZL RMH ZL RL RMH ZL RPress the Tuner(Band) buttonand select the FM band.Select MANUAL by pressingthe Stop ( ) button on themain unit.1 Use the andbutton to tune to 89.12• The selection toggles back and forth between “FM” and “AM”each time the Tuner(Band) button is pressed.34 5 6RemoteControlUnitPress the Stop ( ) button to select the PRESETmode. Then press the button to select astation stored in the preset. See the instructions on thenext page to preset stations.Press the Stop ( ) button to select the MANUALmode on the front panel. Then hold in thebutton to make the unit begin automatically searching forbroadcast stations.Press the Stop ( ) button to select the MANUAL modeon the front panel. Press the button to tuneto the desired station. The frequency changesincrementally in either direction each time thecorresponding button is pressed.Auto Station 1Auto Station 2Manual Station1 Select a broadcast station.2MainUnitPress the Function button toselect the desired band (FM,AM).You can listen to the chosen band (FM, AM broadcast stations) by using either theautomatic or manual tuning operation.Press the Program button onthe remote control, FM1 willflash. If you want to save 89.1to FM1, press Program again.To preset other stations,follow steps 1~5 again.If you want to save 89.1 to anotherpreset location(FM2~FM15), pressor , then pressProgram to save it to that location.You can store up to:15 FM stations15 AM stations• FM Frequency Modulation• AM(MW) Medium Wave