10 - EnglishConnectionsSpeaker Cable Connections1. Match each speaker cable bundle to the correct speaker by matching the colored band on each bundleto the colored sticker on the bottom or back of each speaker.2. Connect the speaker wire plugs from each speaker to the back of the product by matching the coloredband on each cable to the colors of the speaker jacks. When connecting, make sure to match label coloron the back of speaker.SURROUNDSURROUNDSURROUNDSURROUNDCenter SpeakerSubwooferFront Speaker (L)Front Speaker (R)Surround Speaker (L)Surround Speaker (R)✎ If you place a speaker near your TV set, the screen color may be distorted because of the magneticfield.| CAUTION |▶ If you want to install the speakers on the wall, fasten screws or nails (not provided) firmly to the wallwherever you want to hang a speaker, and then, using the hole in the rear of each speaker, carefullyhang each speaker on a screw or nail.▶ Do not let children play with or near the speakers. They could get hurt if a speaker falls.▶ When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.▶ Keep the subwoofer speaker out of reach of children to prevent children from inserting their handsor alien substances into the duct (hole) of the subwoofer speaker.▶ Do not hang the subwoofer on the wall by the duct (hole).Connecting to a Network RouterSURROUND LSURROUND RBroadbandserviceBroadbandserviceBroadbandmodemRouterOrBroadband modem (with integrated router)✎ Your router or your Internet Service Provider's policies may prevent the product from accessingSamsung's software update server. If this occurs, contact your Internet Service Provider (ISP) for moreinformation.✎ Try to use the CAT 7 cable to connect.✎ You cannot use the product if the network speed is slower than 10Mbps.✎ DSL users, please use a router to make a network connection.✎ To use the DLNA function, you must connect a PC to the network as shown in the figure above.