Samsung HT-J4500 User Manual

Also see for HT-J4500: User manual User manual User manual User manual User manual

20 - EnglishSettings8. Unzip the zip archive to your computer. Youshould have a single folder with the same nameas the zip file.9. Copy the folder to a USB flash drive.10. Make sure no disc is inserted in the product,and then insert the USB flash drive into the USBport of the product.11. In the product’s menu, go to Settings > Support> Software Upgrade.12. Select By USB.13. The home theater searches for the software onthe USB drive. When it finds the software, theUpdate Request pop-up appears.14. Select OK. The home theater turns off, turnson, and then begins the upgrade. When theupgrade is done, the home theater turns off.15. Press the POWER button to turn on the hometheater.✎ There should be no disc in the product whenyou upgrade the software using the USB Hostjack.✎ When the software upgrade is done, checkthe software details in the Software Upgrademenu.Auto Upgrade NotificationIf your product is connected to the network and youset Auto Upgrade Notification on, the product willnotify you if a new software version is available witha pop-up message.1. Turn on the product.2. In the Software Upgrade menu, set AutoUpgrade Notification to On.If there is a new software version available, theproduct will notify you with a pop-up message.3. To upgrade the firmware, select Yes. Theproduct turns off automatically, turns on, andthen begins the upgrade.4. The update progress popup will appear. Whenthe update is complete, the product will turnoff automatically again.5. Press the POWER button to turn on theproduct.Setting Up DLNADLNA lets you play music, video, and photo filesstored in your PC through your home theater.To use DLNA, you must install DLNA software oralready have DLNA software installed on your PCand connect the home theater to your PC via yournetwork (See page 10).✎ PCs running Windows 7 and Windows 8 haveDLNA software (Play To) built in.