Samsung HT-J4500 User Manual

Also see for HT-J4500: User manual User manual User manual User manual User manual

19 - EnglishSettings2. Press the ▼ button to go to the first entry field(IP Address).3. Use the number buttons on your remote toenter numbers.4. When done with each field, use the ▶ buttonto move successively to the next field.You can also use the other arrow buttons tomove up, down, and back.5. Enter the IP Address, Subnet Mask, andGateway values.6. Press the ▼ button to go to DNS.7. Press the ▼ button to go to the first DNS entryfield. Enter the numbers as above.8. Press the RETURN button on your remote.9. Select Network Test, and then press v. Whenthe test is completed, press the RETURN buttonto exit to the previous screen.10. Select Network Status, and then press v.11. The Network Status screen appears.The product verifies the network connectionand then connects to the network. When it isdone, highlight OK, and then press v.Upgrading SoftwareThe Software Upgrade menu allows you toupgrade the product’s software for performanceimprovements or additional services.! Never turn the product off or back on manuallyduring the update process.! The update is complete when the product turnsoff after restarting. Press the POWER button toturn on the updated product for your use.! Samsung Electronics takes no legalresponsibility for product malfunctioncaused by an unstable Internet connectionor consumer negligence during a softwareupgrade.1. In the Home menu, select Settings, and thenpress the v button.2. Select Support, and then press the v button.3. Select Software Upgrade, and then press thev button.4. Select one of the following methods:! By Online! By USB! Auto Upgrade Notification5. Press the v button.Directions for each method begin below.✎ If you want to cancel the upgrade while theupgrade software is downloading, press thev button.By OnlineYour product must be connected to the Internet touse the By Online function. Remove all discs beforeyou begin.1. Select By Online, and then press the v button.The Connecting to Server message appears.2. If an update is available, a popup messageappears asking if you want to upgrade. If youselect Yes, the product turns off automatically,turns on, and then begins the upgrade.3. The update progress popup appears. Whenthe update is completed, the product turns offautomatically again.4. Press the POWER button to turn on theproduct.By USB1. Visit www.samsung.com.2. Click OWNERS & SUPPORT on the top rightof the page, and then select Manuals &Downloads from the drop down that appears.3. On the next screen, enter the product's modelnumber into the search field. As you enterthe model number, a drop down will displayproducts that match the model number.4. Left click your product's model number in thedrop down list.5. On the page that appears, select Downloads.6. Find the Upgrade File (USB type) in theDescription column. Click the ZIP icon in theDownload File column on the right.7. Click Send in the pop-up that appears. The filedownloads to your PC.