021Starting the Recording modeHow to use the Program modeSelecting the automatic mode will configure the camera with optimalsettings and you can manually configure various functions.1. Select the Program mode by using theMode dial. (p.20)2. Point the camera towards the subjectand compose the image by using theLCD monitor.3. Press the Shutter button to capture animage.Ã Refer to page 40-47 for moreinformation about the Program mode menus.How to use the Manual modeThe user can manually set both the aperture value and the shutterspeed.1. Select the Manual mode by using theMode dial. (p.20)2. Point the camera towards the subjectand compose the image by using theLCD monitor.3. Press the Shutter button to capture animage.Ã Refer to page 45 for more informationabout the menus.How to use the DUAL IS(Dual Image Stabilization) modeThis mode will reduce the effect of camera shake and help you get awell exposed image in dim conditions.1. Select the DUAL IS mode by using theMode dial. (p.20)2. Point the camera towards the subjectand compose the image by using theLCD monitor.3. Press the Shutter button to capture animage. Things to watch out for using the DUAL IS mode– The digital zoom will not operate in the DUAL IS mode.– If the lighting conditions are brighter than fluorescent lighting conditions,the DUAL IS will not activate.– If the lighting conditions are darker than in fluorescent lightingconditions, camera shake warning indicator ( ) will be displayed.For best results only take pictures in situations where the camera shakewarning indicator ( ) is not displayed.– If the subject is moving, the captured image may be blurred.– As the DUAL IS uses the camera’s digital signal processor, it may takea little longer for the camera to process and save the images.11111/30 F3.31/30 F3.311