045Fn button: White balance Using the Custom White BalanceWhite balance settings may vary slightly depending on the shootingenvironment. You can select the most appropriate white balance setting fora given shooting environment by setting up the custom white balance.1. Select the [Measure: SH] ( ) menuof the White Balance and place a sheetof white paper in front of the camera sothat the LCD monitor shows only white.2. MENU/OK button: Selects previouscustom whitebalance.Shutter button: Saves new custom white balance.– The custom white balance value will be applied, starting with thenext picture you take.– The user configured white balance will be remain effective until it isoverwritten.Fn button: Aperture ValueThis mode will set the aperture value forautomatic exposure in manual mode.Smaller aperture values make the objectsharp but blur the background. Largeraperture values make both the objectand background sharp. Setting up the Aperture ValuePress the Fn button. Then press the command lever to the left or right toset the aperture value.Fn button: Shutter SpeedThis mode will set the shutter speed forautomatic exposure in manual mode.High shutter speeds can capture amoving object in a way that makes itseem as if the object is not moving. Lowshutter speeds can capture a movingobject, giving it a dynamic feeling ofmovement. Setting up the Shutter SpeedPress the Fn button and then Left/Right button. Press the commandlever to the left or right to set the shutter speed.Aperture ValueShutter SpeedWhite paper111/30 F3.31/30 F3.3111/30 F3.31/30 F3.3
