054OIS (Optical image Stabilization)This feature allows you to minimize camera shake while taking apicture.- [OIS] Sub menus: [Off], [On]z OIS function may not work sufficiently in the following cases.– To take pictures of a moving subject.– To take pictures with higher digital zoom values.– When camera shake is beyond the camera-shake correctionrange.– When the shutter speed is slow.– When the battery is low.z If you operate OIS function using a tripod, the image can beblurred by the vibration of the sensor of the OIS. Turn off the OISfunction when you use a tripod.z If the camera is subjected to an impact, the LCD monitor can beaffected. To make the camera function properly again, turn it onand off.Voice MemoYou can add your voice-over to a storedstill image. (Max. 10 sec.)– If the voice memo indicator is displayedon the LCD monitor, the setting iscompleted.– Press the Shutter button and take apicture. The picture is stored on thememory card.– Voice memo will be recorded for tenseconds from the moment the pictureis stored. In the middle of the soundrecording, pressing the Shutter buttonwill stop the voice memo.RECORDINGCommand LeverFlash EVCQualityACBOISVoice MemoBack SetOffOnOKRECORDINGCommand LeverFlash EVCQualityACBOISVoice MemoBack SetOffOnOK1111Stop00:00:03
