Section 2I: Using Voice Recognition 108Using Call You can voice dial from your phone with a single command bysaying “Call” followed by a name or nickname (see contact listdocumentations for details) and (optionally) a label stored in yourcontact list, or “Call” followed by a valid phone number. You canalso say “Call” by itself and be prompted for the name or number.Calling Contacts EntriesTo place a call using Call :1. Press and hold .2. Say “Call” followed by the name and the label for that number.For example, say “Call John Mobile.” The phone dials thenumber stored for the contact “John” with the label “Mobile.”If the location recognized for the name does not have a numberstored in contacts, VoiceSignal will play the message “No numberavailable, John Smith, Mobile,” and then launch the Contactsapplication for that name.If a name has only a single number, or if you know the name but arenot sure which number to call, say “Call” followed by the name only.For example, say “Call John.” If the name is recognized and there isonly one number for the name, VoiceSignal immediately places thecall. If there are multiple numbers stored for the contact, the phoneprompts you with “Which Number?” and displays a list of options.You can select an option by saying it or by using your keypad.Calling Nick NamesYour Contact List incorporates a new field called “Nickname.” Whenyou add a nickname to a contact, you can say the contact's name ornickname when using the voice features. For example, if you have acontact, “John Smith” stored in your contact list, and you add, “Dad”to the nickname field, you can call that contact by saying, “Call JohnSmith” or by saying “Call Dad.”Tip: If your contact list contains a name that you have difficulty using with thevoice features (such as some unusual or foreign names), you can add anickname for that contact that spells out the proper pronunciation ofthat name.
