Tip: To redial your last outgoing call, press TALK twice.When making calls while roaming off the Sprint Nationwide PCSNetwork, always dial using 11 digits (1 + area code + phone number). Formore information, see "Sprint PCS International Roaming" on page 177.Section 2A: Your Sprint PCS Phone - The Basics 23You can also place calls from your Sprint PCS Phone by usingSprint PCS Voice CommandSM(page 173), Speed Dialing numbersfrom your Contacts (page 29), and using your Call History listings(page 86).Tip: To speed dial a phone number from standby mode, press and hold thespeed dial number. If the speed dial number is two digits, enter the firstdigit, then press and hold the second digit. (For information on setting upspeed dial numbers, see “Assigning Speed Dial Numbers” on page 92.)(This feature will not work when you are roaming off the SprintNationwidePCS Network; when roaming you must dial using elevendigits [1 + the area code + the seven-digit phone number.])Answering CallsTo answer an incoming call:1. Make sure your phone is on. (If your phone is off, incomingcalls go to voicemail.)2. Press to answer an incoming call. (Depending on yourphone’s settings, you may also answer incoming calls byopening the phone or by pressing any number key. See “CallAnswer Mode” on page 50 for more information.)Your Sprint PCS Phone notifies you of incoming calls in thefollowing ways: The phone rings or vibrates (unless set to Silence All). The LED flashes. The backlight illuminates. The screen displays an incoming call message.
