Getting Started 92. Plug the flat end of the Travel Adapter into the Power/Accessory Interface connector and the other end into astandard AC wall outlet.3. When charging is finished, first unplug the adapter’s powerplug from the AC wall outlet and then remove the flat endfrom the interface connector jack on the phone.Warning!: If your device has a touch screen display, please note that atouchscreen responds best to a light touch from the pad of yourfinger or a non-metallic stylus. Using excessive force or a metallicobject when pressing on the touch screen may damage thetempered glass surface and void the warranty. For moreinformation, refer to “Standard Limited Warranty” on page 212.Note: Failure to unplug the wall charger before you remove the battery, cancause damage to the phone.Low Battery IndicatorWhen the battery is weak and only a few minutes of talk timeremain, the battery icon ( ) blinks and the device sounds awarning tone at regular intervals. In this condition, your phoneconserves its remaining battery power, not by turning off thebacklight, but by entering the dimming mode. For a quick checkof your battery level, glance at the battery charge indicatorlocated in the upper-right corner of your device’s display.When the battery level becomes too low, the phone automaticallyturns off.Switching the Phone On or Off1. Press and hold or until the phone switcheson.The phone launches the activation splash screen and thenproceeds to search for the network. Once the network hasbeen found, you can make or receive calls.Note: The display language is preset to English at the factory. To change thelanguage, use the Language menu. For more information, refer to“Changing Your Settings” on page 52.CorrectIncorrecta877 Impression.book Page 9 Thursday, May 13, 2010 3:29 PM
