154Changing the WAP ProfilesConnection can be made via either one of three availableconnection profiles: MEdia Net, AT&T MMS (MultiMedia Server),or AT&T IMS. Use this menu to create and customize the profilescontaining the settings for connecting your phone to the network.You need these settings to use the WAP browser or to send MMSmessages or Email messages.Note: Although the active connection can be changed by the user, it isrecommended that this choice be made with the assistance of eitherthe retailer or customer service representative.1. In Idle mode, touch ➔ Mobile Web ➔ ➔Browser Profiles.2. Touch one of the following profiles:• MEdia Net• AT&T MMS• AT&T IMSCaution!: The WAPs are pre-configured and can not be altered using thisscreen. If you change the settings without first checking with yourservice provider, the web browser, MMS, and e-mail features maynot work properly.3. To create a new connection profile, touch and followthe onscreen prompts.– or –To edit an existing profile, touch a profile from list, scroll tothe desired field, and use the onscreen keypad/keyboardto edit the parameter you want to edit:• Set Name: enter a profile name.• Access Name: edit the access point name.• Auth Type: select the type of authentication used for this WAPconnection: None, Normal, or Secure.• User ID: enter the User ID required to connect to the network.• Password: enter the user password required to connect to thenetwork.• Protocol: set the connection protocol used by the WAP browser:WAP or HTTP.• Home URL: enter the URL address of the page to be used as yourhomepage.• Gateway Address: (WAP only) enter the gateway address of theproxy server.• Proxy Address: (HTTP only) set the proxy server address and port.• Secure Connection: (WAP only).Createa877 Impression.book Page 154 Thursday, May 13, 2010 3:29 PM
