64contents, you must enter the phone’s password to access theassociated menus.Note: The first time you access the password screen, you will be prompted tocreate a password.1. Touch the Lock Applications field.2. Touch the check box next to each application you wish tolock, or touch All to select all applications.• Applications include: Messaging, My Stuff, Recent Calls, AddressBook, Calendar, Memo, IM, and Tasks.• Touch to store your new selections.3. Enter a new password (during the first use) using theonscreen keypad into the New Password field and touch.4. Enter the new password again and touch .Note: To change this password, see “Change Phone Password” on page 64.Fixed Dialing ModeFDN (Fixed Dial Number) mode, if supported by your SIM card,restricts your outgoing calls to a limited set of phone numbers.When this feature is enabled, you can make calls only to phonenumbers stored in the FDN list on the SIM card. For moreinformation, refer to “FDN Mode” on page 85.1. Touch On or Off from the Fixed Dialing Mode field.• On: you can only call phone numbers stored in the Address Book.You must enter your PIN2 to continue this configuration. You canobtain your PIN2 from AT&T’s customer service department.• Off: you can call any number.2. Use the onscreen keypad to enter your PIN2 Code andtouch .Note: The PIN2 code is provided by AT&T. Entering an incorrect PIN2 codecan cause the phone to lock, at which point, you will have to call AT&Tcustomer service for assistance.Change Phone PasswordThe Change password feature allows you to change your currentphone password to a new one. You must enter the currentpassword before you can specify a new one.1. Touch the Change Phone Password field.2. Enter the current phone password and touch .Note: Initially, the phone will not have a password assigned, and step 2 willnot be necessary. Once a password is assigned, all steps arenecessary.Savea877 Impression.book Page 64 Thursday, May 13, 2010 3:29 PM
