《22》Macro ( ) / Down button Flash ( ) / Left button■ Available focusing method, by recording mode(O : Selectable, X : Not selectable, ∞ : Infinity focus range)■ To focus on a subject not positioned in the centre of the picture, use the focus lock function.● Using the Focus Lock1. Ensure the subject is in the centre of the autofocus frame.2. Press the SHUTTER button halfway. When the green auto focus frame lightsup, it means the camera is focused on the subject. Be careful not to press theSHUTTER button all the way down to avoid taking an unwanted picture.3. With the SHUTTER button still pressed down only halfway, move the camerato recompose your picture as desired, and then press the SHUTTER buttoncompletely to take the picture. If you release your finger from the SHUTTERbutton, the focus lock function will be cancelled.1. The image to becaptured.2. Press the SHUTTERbutton halfway andfocus on the subject.3. Recompose the pictureand fully depress theSHUTTER button.Focus lock ● Flash range (Unit : m)■ When the menu is displayed on the LCD monitor,pressing the LEFT button makes the cursor shift tothe left tab.■ When the menu is not displayed on the LCDmonitor, the LEFT button operates as the FLASH( ) button.● Selecting the flash mode1. Select a RECORDING mode with the exception of MOVIE CLIP mode. (p.15, 17)2. Press the Flash button until the desired flash mode indicator displays on theLCD monitor.3. A flash mode indicator will be displayed on the LCD monitor.Use the correct flash to suit the environment.[Selecting the Auto flash]O O OO X OX O XSCENEModeNormalMacroAuto macroNormalMacroAuto macroModeO O O ∞ X X ∞ ∞ O ∞ OX X X X X O X X X X XX X X X O X X X X X XWIDE TELE WIDE TELE WIDE TELE0.8 ~ 3.0 0.8 ~ 2.5 0.4 ~ 0.8 0.5 ~ 0.8 0.4 ~ 3.0 0.5 ~ 2.5ISOAUTONormal Macro Auto macro