Samsung L Series User Manual

Contents

《56》■ If you enable Quick View before capturing an image, you can view the imageyou just captured on the LCD monitor for the duration set in the [Quick View]setup. Quick view is possible only with still images.[Off] : The quick view function can’t beactivated.[0.5, 1, 3sec] : The captured image is brieflydisplayed during the selected time.Initialisation■ All camera menu and function settings will be restored to their default values.However, values for DATE / TIME, LANGUAGE, and VIDEO OUT will not bechanged.If [No] is selected : Settings will not be restored totheir defaults.If [Yes] is selected : All settings will be restored totheir defaults.LCD brightness Selecting Video out type■ The Movie output signal from the camera can beNTSC or PAL. Your choice of output will begoverned by the type of device (monitor or TV, etc.)to which the camera is connected. PAL mode cansupport only BDGHI.● NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.● PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany,U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore,Spain, Sweden, Switzerland, Thailand, Norway.INFORMATION● When using a TV as an external monitor, you will need to select the externalor AV channel of the TV.● There will be a digital noise on the external monitor, but it is not a malfunction.● If the image is not in the centre of the screen, use the TV controls to centre it.● The menu functions are the same as those indicated on the LCD monitor.INFORMATIONYellow - VideoWhite - soundQuick viewSelecting Video out type■ You can adjust the LCD brightness.SETUPUSBLCDVideo OutQuick ViewResetBack: Set:OKNTSCPALSETUPSOundUSBLCDVideo OutQuick ViewBack: Set:OKDarkNormalBrightSETUPUSBLCDVideo OutQuick ViewResetBack: Set:OKoff0.5 sec1 sec3 secSETUPUSBLCDVideo OutQuick ViewResetBack: Set:OKNoYes