《32》Using the LCD monitor to set the camera settings How to use the menu1. Turn on the camera and press the MENU button. A menu for each cameramode appears. However, there is no menu for Voice Recording mode ( ).2. Use the LEFT and RIGHT buttons to navigate through the menus.3. Use the UP and DOWN buttons to select a sub menu.4. Select a sub menu, and then the value you set will be saved.Press the MENU button and the menu will disappear.Press theLEFT orRIGHT button.Press theUP or DOWNbutton.Press theUP or DOWNbutton.Press theLEFT orRIGHT button.SIZE3072x23042592x19442048x15361024x768MODESTILL & MOVIEFULL※ Menus are subject to change without prior notice.Menu tab Main menu Sub menu Camera working mode PageSuper Fine FineNormal -FRAME RATE 30 FPS 15 FPS p.34METERING Multi Spot p.35Single ContinuousAEB -Soft NormalVivid -Full BasicLCD Save -p.34p.36p.35p.35QUALITYSHARPNESSSHOOTINGOSDINFORMATIONMODE SETAutoProgramMovieNightPortraitExit:MENU Move:MODE SETAutoProgramMovieNightPortraitMove: Set:OKMODE SETAutoProgramMovieNightPortraitMove: Set:OKMODE SETProgramMovieNightPortraitChildrenMove: Set:OK