English - 1Changing the Picture StandardYou can select the type of picture which best corresponds toyour viewing requirements.1. Press the MENU button to display the menu.Press the ENtER button, to select "Picture".. Press the ENtER button again, to select "Mode".. Press the ▲ or ▼ button to select the desired picture effect.Press the ENtER button.. Press the EXIt button to exit.Dynamic: Selects the picture for high-definition in a brightroom.Standard: Selects the picture for optimum display in anormal environment.Movie: Selects the picture for comfortable display in a darkroom.♦♦♦The Picture mode must be adjusted separately for each inputsource.You can also press the P.MODE button on the remote control toselect one of the picture settings.Easy Setting1. Press the tOOLS button on the remote control.. Press the ▲ or ▼ button to select “Picture Mode”.. Press the ◄ or ► button to select the desired picture mode.. Press the EXIt or tOOLS button to exit.➣toolsAnynet+ (hDMI-CEC)Picture Mode ◄ Standard ►Sound Mode : CustomSleep timer : OffSRS tS Xt : OffEnergy Saving : OffDual l-ll : MonoMove Adjust ExitPictureMode : Standard backlight Contrast 9brightness 0Sharpness 0Colour 0tint G0 R0Detailed Settings sMoretVMove Enter ReturnPictureMode : Standardbacklight Contrast 9brightness 0Sharpness 0Colour 0tint G0 R0Detailed SettingssMoretVMove Enter ReturnDynamicStandardMovie
