Samsung LA40A750R1R User Manual

Contents

English - Setting up the tV with your PCPress the SOURCE button to select PC mode.1. Press the MENU button to display the menu.Press the ENtER button, to select "Picture".. Select the required option by pressing the ▲ or ▼ button,then press the ENtER button.. When you are satisfied with your setting, press the ENtERbutton.. Press the EXIt button to exit.Auto AdjustmentAuto adjustment allows the PC screen of set to self-adjust tothe incoming PC video signal. The values of fine, coarse andposition are adjusted automatically.Easy Setting1. Press the tOOLS button on the remote control.. Press the ▲ or ▼ button to select “Auto Adjustment”, thenpress the ENtER button.Screen Adjustment:Coarse/FineThe purpose of picture quality adjustment is to remove or reducepicture noise. If the noise is not removed by Fine-tuning alone,then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, readjust the pictureso that it is aligned on the center of screen.Press the ▲ or ▼ button to select "Coarse" or "Fine", then pressthe ENtER button.Press the ◄ or ► button to adjust the screen quality.Press the ENtER button.PositionAdjust the PC’s screen positioning if it does not fit the TV screen.Press the ▲ or ▼ button to adjusting the Vertical-Position.Press the ◄ or ► button to adjust the Horizontal-Position.Press the ENtER button.Image ResetYou can replace all image settings with the factory defaultvalues.➣♦♦Auto Adjustment in progressPlease wait.tV Screen AdjustmentCoarse 0Fine 9Position Image Reset Move Enter ReturntV PositionMove Enter ReturntV Screen AdjustmentCoarse 0Fine 9Position Image Reset Move Enter ReturnPictureMode : Standard backlight Contrast 9brightness Sharpness 0Auto Adjustment Screen Adjustment Detailed Settings sMoretVMove Enter ReturntoolsAnynet+ (hDMI-CEC)Picture Mode : StandardSound Mode : CustomSleep timer : OffSRS tS Xt : OffEnergy Saving : OffPIPAuto AdjustmentMove Enter Exit