Samsung LA40A750R1R User Manual

Contents

English - 1Configuring Picture Option1. Press the MENU button to display the menu.Press the ENtER button, to select "Picture".. Press the ▲ or ▼ button to select "Picture Options", then pressthe ENtER button.. Select the required option by pressing the ▲ or ▼ button, thenpress the ENtER button.. When you are satisfied with your setting, press the ENtERbutton.. Press the EXIt button to exit.In PC mode, you can only make changes to the “ColourTone” and “Size” from among the items in “Picture Options”.Colour tone: Cool/Cool1/Normal/Warm1/WarmYou can select the most comfortable colour tone to your eyes.The adjusted values are stored according to the selected"Picture" mode.When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected.Size: 1:9/Wide Zoom/Zoom/:/Just ScanYou can select the picture size which best corresponds to your viewing requirements.1:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.Wide Zoom: Magnify the size of the picture more than 4:3.Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.:: This is the default setting for a video movie or normal broadcasting.Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i/1080p) or Component (1080i/1080p) signals are input.♦♦♦♦♦In PC Mode, only "16:9" and "4:3" mode can be adjusted.Settings can be adjusted and stored for each external device you have connected to an input ofthe TV.Temporary image retention may occur when viewing a static image on the set for more than twohours."Wide Zoom": Move the screen up/down using the ▲ or ▼ button after selecting the bypressing the ► or ENtER button."Zoom": Select by pressing the ◄ or ►button. Use the ▲ or ▼ button to move the picture upand down. After selecting , use the ▲ or ▼ button to magnify or reduce the picture size in thevertical direction.When Double ( , ) mode has been set in PIP, the Picture Size cannot be set.After selecting “Just Scan” in hDMI (100i/100p) or Component (100i/100p) mode:Select by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.Reset: Press the ◄ or ► button to select “Reset”, then press the ENtER button.You can initialize the setting.If you use the “Just Scan” function with HDMI 720p input, 1 line will be cut at the top, bottom, leftand right as in the overscan function.You can select these options by simply pressing the P.SIZEbutton on the remote control.➣♦➣➣♦➣➣➣➣➣➣➣➣PictureMorePicture Options Reset : Ok tVMove Enter ReturnPicture OptionsColour tone : Normal Size : 1:9 Digital NR : Auto DNIe : Off hDMI black Level : Normal 10hz Motion Plus : Off blue Only Mode : Off Move Enter ReturntV