Samsung LN40D630M3FXZA User Manual

Also see for LN40D610: User manual User manual User manual

Basic FeaturesSPDIF OutputSPDIF (Sony Philips Digital Interface)is used to provide digitalsound, reducing interference going to speakers and variousdigital devices such as a DVD player.[] Audio Format: During the reception of a digital TVbroadcast, you can select the Digital Audio output(SPDIF) format from the options PCM or Dolby Digital.By connecting to 5.1ch speakers in a dolbydigital setup, maximize your interactive 3D soundexperience.[] Audio Delay: Correct audio-video mismatch, whenwatching TV or video, and listening to digital audiooutput using an external device such as an AV receiver(0ms - 250ms).Sound Reset (OK! CanceO ....................................................................................................Reset all sound settings to the factory defaults.Setting the Time[_ MENU ml -_ Setup -_ Time -_ ENTER IZ_TimeThe current time will appear every time you press the_NFO button.[] Clock: Setting the clock is for using various timerfeatures of the TV,if you disconnect the power cord, you have to setthe clock again,Clock Mode: Set up the current time manually orautomatically.Auto: Set the current time automatically using thetime from a digital channekThe antenna must be connected in order to setthe time automatically.Manual: Set the current time manually.Depending on the broadcast station and signal,the auto time set up may not be correct, in thiscase, set the time manually.Clock Set: Set the Month, Day, Year, Hour, Minuteand am/pm.Available only when Clock Mode is set toManual.You can set the month, day, year, hour and minutedirectly by pressing the number buttons on theremote control.![]DST (Off / On): Switches the DST(Daylight Saving Time)function on or off.This function is only available when the ClockMode is set to Auto.Time Zone: Select your time zone.This function is only available when the ClockMode is set to Auto.Using the Sleep TimerMENU rlTI --_ Setup _ Time --_ Sleep TimerENTERI_Sleep Timer _ : Automaticallyshuts off the TV after a preset periodof time. (30, 60, 90, 120, 150 and 180minutes).To cancel the Sleep Timer, selectOff.Setting the On/Off Timer(_ MENU rlTI --_ Setup _ Time --_Timer 1ENTERI_[] Timer 1 / Timer 2 / Timer 3: Three different on / offtimer settings can be made. You must set the clock first.On Time / Off Time: Set the hour, minute, am/pm andactivate/inactivate. (To activate the timer with the settingyou have chosen, set to Activate.)Volume: Set the desired volume level.Source: Select -iV or USB content to be played whenthe TV is turned on automatically. (USB can be selectedonly when a USB device is connected to the TV)Antenna (when the Source is set to rv): Select Air orCable.8 English