Samsung LN40D630M3FXZA User Manual

Also see for LN40D610: User manual User manual User manual

The cable/set top box remote control • Program the Cable/Sat remote control to operate the TV. Refer to Cable/Sat user manual fordoes not turn the TV on or off, or adjust SAMSUNG TV code.the volume.A "Mode Not Supported" message • Check the supported resolution of the TV and adjust the external device's output resolutionappears, accordingly. Refer to resolution settings in this manual.Caption oil TV menu is greyed out. • Caption can not be selected in the TV menu when connected via HDMI or Component.• Caption must be activated on the external device.There is a plastic smell from the TV. • This smell is normal and will dissipate over time.TV Signal information is unavailable in • This function is only available with digital channels from an Antenna / RF/Coax connection,the Self Diagnosis Test menu. (R 22)TV is tilted to right or left side. ,, Remove the stand base from TV and reassemble it.The Channel menu is grey out ,, The Channel menu is only available wtqen the TV source is selected.(unavailable).Your settings are lost after 30 minutes ,, If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes.or every time TV is turned off. Please change from Store Demo mode to Home Use mode in the Plug & Play procedure.Press the SOURCE button to select TV mode, go to MENU _ Setup _ Plug & PlayENTER _.You have intermittent loss of audio or ,, Check the cable connections and reconnect them.video. ,, Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cablesare flexible enough for long term use. mounting the TV to the wall, we recommend using cableswith 90 degree connectors.The PIP menu is not available. ,, PIP functionality is only available wtqen you are using a HDMI, PC or components source.You see small particles wtqen you look ,, This is part of the product's design and is not a defect.closely at the edge of the frame ofthe T_POP (TV's internal banner ad) appears ,, Select Home Use under Plug & Play mode.on the screen. For details, refer to Plug & Play (Initial Setup). (R 7)This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However,there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of theproduct.Storage and MaintenanceIf you remove the attached sticker on the TV screen, clean the residues and then watch TV,English 47