Adjusting the TV On/Off IVlelodySoundA melody sound can be set to come on when the TV is powered On or Off.1. Press the MENU button to display the menu.Press the A or T button to select "Setup", then press the ENTER _ button.2, Press the A or T button to select "External Settings", then press the ENTERG# button.1 Press the A or T button to select "Melody", then press the ENTER C#button.Press the A, or T button to select "Off', "Low", "Medium" or "High", thenpress the ENTER _ button., High: Sets the melody VolUme to high:Press the EXIT button to exit.The Melody does not play- When no sound is output from the TV because the MUTE button has beenpressed,- When no sound is output from the TV because the volume has beenreduced to minimum with the VOL - button.- When the TV is turned off by Timer function.Setting the Light EffectYou can turn the LED on the front of TV on/off.1. Press the MENU button to display the menu.Press the A or T button to select "Setup", then press the ENTER _ button.2, Press the A or _r button to select "External Settings" then press theENTER C_ button.1 Press the A or T button to select "Light Effect", then press theENTER _ button.Press the A or T button to select "Off', "In Standby", "When Watching TV" or"Always", then press the ENTER _ button.;Off: LED Will not Come on.Standby: TUinS the LED Onin standbY rhode,When Watching TVi TurnS the LED On while WatChing TviAiwaysi EED will come on after turn theTV Off.Press the EXIT button to exit.>- Set the "Light Effect" to "Off' to reduce power consumption.