147Network77 NetworkManual Network SetupUse the Manual Network Settings when connecting your product to a network that requires a Static IPaddress or if the automatic connection process has failed.Getting the Network Connection ValuesTo view the Network connection values on most Windows computers, follow these steps.1 Right click the Network icon on the bottom right of the screen.2 In the pop-up menu that appears, click Status.3 On the dialog that appears, click the Support tab.4 On the Support Tab, click the Details button. The Network connection values are displayed.How to set up manuallyTo set up your product cable network connection manually, follow these steps.1 Go to the Network Settings screen.2 Select Wireless (General), press [ ], and then press [ ] again.3 The Network function searches for available wireless networks. When done, it displays a list of theavailable networks.4 In the list of networks, press the or button to select a network, and then press the [ ] buttontwice.If the wireless router is set to Hidden (Invisible), you have to select Add Network and enter thecorrect Network Name (SSID) and Security key to establish the connection.5 If the Enter security key screen appears, go to step 6. If you selected an wireless router that does nothave security, go to step 8.6 Enter the Security key (Security key or PIN).z When you enter the Security key (Security key or PIN), use the / / / buttons on yourremote to select number/characters. Press [ ] to enter the characters.z You can also enter numbers by pressing the number buttons on your remote.z You should be able to find the Pass Phrase on one of the set up screens you used to set upyour router or modem.7 When done, use the button to move the cursor to Next, and then press the [ ] button.8 The network connection screen appears and the verification process starts. Press [ ] to cancel.Select IP Settings on the network connection screen. The IP Settings screen appears.9 Select the field on the top, press [ ], and then set IP Mode to Manual.10 Press the button on your remote to go to the IP Address entry field, and then press [ ].11 Enter the first portion of the IP Address (for example, 105) into the first entry field using the numberkeys on your remote. Press the button to go to the next field.12 Enter the next portion of the IP Address. Press the button to go to the next field.
