169System88 System8.12 Source AutoSwitch SettingsMENU [ ] System Source AutoSwitch Settings ENTER [ ]Turning on the display with Source AutoSwitch On, and the previous video source selection is notactive, the display will automatically search the different video input sources for active video.z Source AutoSwitchWhen the Source AutoSwitch is On, the display video source will automatically be searched foractive video.The Primary Source selection will be activated, if the current video source is not recognized.Secondary Source selection will become active, if no primary video source is available.If both the primary and secondary input sources are not recognized, the display will perform twosearches for an active source, each search checking the primary and then secondary source. If bothsearches fail, the display will return to the first video source and display a message indicating thatthere is no signal.When the Primary Source selection is set to All, the display will search all the video source inputstwice in sequence looking for an active video source, returning back to the first video source in thesequence if no video is found.z Primary SourceSpecify Primary Source for the automatic input source.z Secondary SourceSpecify Secondary Source for the automatic input source.The displayed image may differ depending on the model.mSource AutoSwitch SettingsSource AutoSwitch· Primary Source· Secondary SourceOnAllTV
